Angle bung entry mixer can be applied for mixing in closed drums.

Screw angle bracket into a 2” bung opening and fasten the set screw to the angle bracket after the mixer is placed into the drum.

Special designed stainless steel blade will fit easily, blades extend by centrifugal force when operating and retracts when stopped.

C-Clamp mount portable air mixer is suitable for mixing large volumes of light and medium viscosity materials in open drum.

Operating angles may be easily adjusted for the most efficient mixing position.

Mass (kg) :1/4HP-- 8.5, 1/2HP--12.4

Optional choices :

An excellent cost effective solution for mixing and blending of light to medium viscosity materials.

Mount bracket will securely fit on almost any steel drum.

It can be easily moved from one tank to another.

Mixer Weight: 1/4HP--9   1/4HP, SUS--10;

                            1/2HP--11  1/2HP, SUS--13

                            1HP--29.4   1HP, SUS--35

TS-5A Stand Air Mixer

Suitable for mixing 5 gallon square and round tanks.

Simply place contains under four leg stand to start mixing application.

Step less speed control may be adjusted freely.

TS-LM1 Hand-Held Mixers

This uniquely designed mixer is compact and unsurpassed for mixing paint, resin, chemicals, epoxies, ink…etc.

TS-AD3-4
Hand Held AIR Drill Mixer

Portable hand held mixer features step less sped control and 100% Explosion-proof.

It may be used in hazardous environments.

Shaft: Ø 12.7mm * 550mm

Chuck: 1/4”

Standard Shaft length: 
Propeller type:
Available HP:
Optional choice:

TS-ED3
Hand Held Electric Drill Mixer

Standard Shaft length:
Propeller type:
Available HP:
Optional choice:

TS-ED4 

Hand Held Electric Drill Mixer

Electric hand held mixer features variable speed adjustment, with and open ventilated motors.

Warning:

Not applicable when working with flammable contents.

Shaft: Ø 12.7mm * 550mm

Chuck: 1/4”

Standard Shaft length:
Propeller type:
Available HP:
Optional choice:

TS-FL 

Laboratory Air mixer

Designed for mixing small volumes, suitable for sampling in paint industry, chemical or biological laboratories.

TS-FL-1
 Laboratory Air Mixer with stand clamp

Designed for mixing small volumes, suitable for sampling in paint industry, chemical or biological laboratories.

M3-TB
Pneumatic Lift Stand Mixer

Remove air motor off stand after loosen clamp set screw.

Insert motor shaft into 2” opening and adjust for preferred angle for mixing.

Suitable for mixing 5 Gal.

Tank or drums up to 40cm diameter.

Elevation of mixer may be pneumatically adjusted.

Fully constructed of stainless steel.

Manual elevation adjustment.

Suitable for pharmaceutical, food, volatile and chemical industry.

TS-HA
Manual Lift Bench Mixer

Suitable for mixing 20 liters tank or drums up to 40cm diameter. Elevation of the mixer may be manually adjusted.

WEIGHT (kg): 1/4HP: 19.1 1/2HP:21.5

M5-TU, M7-TU
Mobile Pneumatic Lift Stand Mixer

TU Series air lift mixer is ruggedly constructed from C channel steel.

It accommodates drum or tanks up to 960mm in diameter.

Equipped with 4sturdy casters ( 2 fixed and 2 swivel ) for easy movability.

One set of casters has brakes for securely locking the stand in place. Maximum height is 970mm after air mixer raises.

HM-2 HM-3
Bung-mounted Helix Mixer

Uniquely applicable for 2" bung-mounting and to reduce volatile fluid evaporation while
maintaining purity of sealed drum contents. Large spiral-shaped blade mixes paints,
resins, urethanes and epoxies efficiently. Particularly effective for semiconductor
manufacturing process and mixing higher viscosity fluids. Stainless steel models are
water base compatible. Teflon coating available for strong acid/alkali resistance.